Yorkland Controls is a stocking authorized distributor for Badger Meter/Data Industrial.

Badger Meter impeller products and water flow sensors are used to measure liquids in a variety of industrial and commercial markets. These insertion and inline impeller meters serve a wide range of markets including irrigation, HVAC, energy management, water treatment, fire fighting apparatus and general industrial. Additionally, Badger Meter manufactures and markets Btu monitors and transmitters that are compatible with virtually all energy management systems. The Impeller Products division also offers wireless RF flow sensors to the turf and agricultural irrigation markets utilizing its years of expertise in the Automatic Meter Reading market. Data acquisition and data management systems are also offered either by direct wire connections or via a wireless network technology.

A sample of the available products from Yorkland include:

Series 380 BTU Meter

Model 3050 Energy Monitor

Series 228/250 Flow Sensors

The Data Industrial Series 228/250 flow sensors feature a six bladed impeller design with a proprietary non-magnetic sensing mechanism. As the liquid flow turns the impeller, a low impedance square wave signal is transmitted with a frequency proportional to the flow rate. The signal can travel up to 2000' between the flow sensor and the display unit without the need for amplification. All sensors except irrigation versions are supplied with 20' of Belden type 9320 two conductor shielded cable.

Series 200 Insertion Flow Sensors

The flow sensor features a six bladed impeller design witha non magnetic sensing mechanism. The forward swept impeller shape provides higher, more constant torque than four bladed impeller designs and is less prone to be fouled by water borne debris. All the sensors are supplied with 20' of Belden type 9320 (two conductor shield) cable.

Series 310 Programmable Analog Transmitter

The Data Industrial Series 310 from Badger Meter is a loop-powered, programmable 4-20mA transmitter designed to accept relatively fast, un-scaled raw pulses from devices like flow sensors and then transmit a linear analog signal of desired scaling and units of measure. In addition to standard Data Industrial flow sensors, the Series 310 can also accept a sine wave making it a versatile transmitter for numerous applications.

Series 320 Programmable Pulse Output Transmitter

The Data Industrial Series 320 from Badger Meter is a compact, programmable transmitter designed to accept relatively fast un-scaled raw pulses from devices like flow sensors and then output slow scaled pulses of programmable width, pulse resolution, and units of measure. In addition to our standard Data Industrial flow sensors, the Series 320 can also accept a sine wave signal making it a versatile transmitter for numerous applications.

Series 340 BN/MB Btu Energy Transmitter

The Data Industrial® 340 BN/MB Btu Energy Transmitter from Badger Meter is an economical, compact device for sub-metering applications utilizing the BACnetTM or Modbus® communications protocol. The 340 BN/MB Btu Energy Transmitter calculates thermal energy using the signal from a flow sensor installed in a hydronic heating or chilled water system, and the signals from two 10k Ω temperature thermistors, 100 Ω RTDs, or 1000 Ω RTDs installed in the system's inlet and outlet points.

Metasys Series 340N2 Programmable Btu Transmitter

The Data Industrial® Series 340N2 Btu transmitter from Badger Meter is an economical, compact device for sub-metering applications using Johnson Controls Metasys® Network Companion™ and Facilitator™ Supervisory Systems.